Table of Contents
Advertisement
THE CONTROL PANEL - MIXER PAGE
12 DAW Main - meters and fader
This section of the mixer handles the
monitoring of the main outputs from
your DAW. Having the controls at this
place allows you to mix the channels
with the DAW signal, right here on the
Mixer page instead of having to switch
between the programs.
You can instantly mute a channel by holding
ctrl+shift and click on the fader handle.
24
13 Effect Return level - Fabrik R*
The reverb plug-in Fabrik R is set up on a bus that
you can send to from each channel. The return level
of this bus is set using this Effect Return level
controller.
* Konnekt 24D only
14 Monitor Mixer - Main Out level
This is where you set the output level for the monitor
mixer. The output from the mixer can be sent to any
of the physical outputs (Line 1+2, 3+4, S/PDIF or
ADAT.
*Konnekt 8 - outputs 1-2 only.
Hide quick links:
Advertisement
Table of Contents
