Table of Contents
Advertisement
1 Konnekt 24D Rear View
The Konnekt rear panel. For better view please refer
to the section "Rear Panel Overview".
2 Active Speakers
In this particular setup we illustrate the Konnekt in
use with a set of active monitors. You may of course
use a standard amplifier and passive speakers as
you prefer.
3 Keyboard
A keyboard is connected to Line In 3/4 for monitoring/
recording purposes. On Konnekt 8 you may use the
aux inputs for monitoring only (no recording).
4 Headphones
In this illustration multiple headphones are connected
via a separate headphones amp. Line outputs 3/4 on
the Konnekt are used to feed the headphone amp.
On the frontpanel an additional set of headphones
can be connected to the non-muting headphones
connection on the frontpanel.
5 Computer
Computer with FireWire interface. Please see the
system requirements section for information on
minimum system requirements.
6 ADAT interface
Digital I/O options can be extended with the use of an
ADAT interface. When used in combination with the 2
channels on coaxial S/PDIF, digital channels 7/8 can
be set to either ADAT or optical
See also page 26.
7 Konnekt 24D front + instruments
Front panel view of the Konnekt illustrated with a
microphone and an electric guitar setup.
S/PDIF.
SETUP EXAMPLES - "STUDIO"
Connecting an electric guitar directly to Konnekt.
Connect a guitar using an standard 1/4 jack and
press the PAD/INST button to "in" position.
Connecting a Condenser microphone.
Konnekt delivers +48v phantom power on the XLR
part of the Combo connection for use with condenser
microphones. Press "phan" to activate phantom
power:
8 FireWire connection to computer
Use as standard FireWire (IEEE 1394) cable between
the computer and Konnekt. Any of the two
connections can be used.
9 Power supply
Konnekt can be bus-powered directly from your
computer's FireWire connection. Please refer to the
computer's manual to see if this is an option.
If bus-power is insufficient or if more than one
Konnekt units is connected to one FireWire bus, you
should use the external power supply delivered with
the Konnekt.
17
Hide quick links:
Advertisement
Table of Contents
