Stand Alone; Control Panel - TC Electronic Konnekt 24D User Manual

SETUP EXAMPLES - "STAND-ALONE"
Konnekt 24D can be used with no computer connected
as a stand-alone unit still providing both the excellent mic
pre-amps and Hi-Z inputs on channels 1 and 2. It is even
possible to use the included Fabrik R (reverb) and
Fabrik C (channel strip & comp).
Set up correctly you can even alternate between three
programs/presets using the "TOTAL RECALL" button.
The programs are prepared via the TC Near software

Control panel.

20
• Connect the microphone to Ch1 and the guitar to Ch2
on the front panel. Activate phantom power if you are
using a condenser microphone.
• Connect a CD player to Konnekt using either the CD-
player's analog outputs to Konnekt Line Inputs 3/4 or
as illustrated using the CD player's optical S/PDIF out
to "Optical DI" on the Konnekt.
• Active speakers can be used as monitors. Feed these
with signal from Main Out L/R.