Handling Security Issues - AMX Epica DGX 16 Instruction Manual

Handling Security Issues

From the NXB-AP-1000 interface, you can enable or disable security access to web server control of the
Epica DGX 16 or 32 system.
If tight security is required, we recommend that the following security measures be followed:
Setting Security Settings
From the Admin drop down menu, select Security Settings to open the Security Settings page
(FIG. 46). Use the options on the page to specify security settings and login information for the
Epica DGX 16 or 32.
FIG. 46
Security Settings page
Click the appropriate check box(es) to enable specific types of security (if one or more are selected, Login
Information is required). The default for each of the Security Settings is "disabled."
Enable/Disable Security Settings
Setting
Web Security
Telnet Security
Admin Security
Epica DGX 16 and Epica DGX 32 Instruction Manual
Enable/Disable the security settings and login information as part of the initial setup
(see below).
Place the server site inside your network firewall.
Deploy the NXB-AP-1000 interface in a secure LAN environment.
Enable the DoD mode setting on the NetLinx Master (see the NetLinx documentation).
Lock the front Control Panel (see page 72).
If extra precaution is necessary, lock the enclosure(s) in a secure location.
When Web Security is enabled, a username and password are required to access any
system Web pages.
When Telnet Security is enabled, a username and password are required to establish a
Telnet or SSH connection.
When Admin Security is enabled, a username and password are required to modify any
system configuration item.
NXB-AP-1000 Interface – Initial Setup by Network Admin
Resulting Restrictions
85