AMX Epica DGX 16 Instruction Manual page 17

Epica DGX 32 rear view
Epica DGX 32
FIG. 3
Rear View Components
The following sections briefly introduce the hardware on the rear of the enclosure.
CPU/Control Board
FIG. 4
The CPU/Control board (FIG. 4) is on the left rear of the enclosure, directly below the input connectors.
Each CPU includes the following port options:
Each CPU includes two main LED indicators:
Epica DGX 16 and Epica DGX 32 Instruction Manual
Input boards (up to 8)
CPU/Control board
Rear view of an Epica DGX 32 enclosure with room for expansion
Input and output boards (some slots may be empty, depending on the configuration)
CPU/Control board
Two standard redundant power supplies
Serial number
Enc Link ports (Ethernet RJ-45, 10/100), use for linking enclosures
System Status indicator
CPU/Control board
Enc Link port (Ethernet RJ-45) – for linking to other types of enclosures (see page 24)
Control port (DB-9, RS-232) – for attaching an external control device (see page 29)
USB (mini-B) port – for attaching an external control device (see page 32)
TCP/IP (RJ-45) port – for establishing an NXB-AP-1000 connection (see page 42)
System Status indicator (between the Enc Link ports and the Control port)
NXB-AP-1000 LED Indicator (left of TCP/IP port) – indicates an active connection
Output boards (up to 8)
Serial number
Control (DB-9, RS-232 serial) port
Overview and General Specifications
Note: Empty input or output
board slots (which are
numbered for expansion)
can be used to upgrade
system.
Empty input and output
board slots
Power supplies
NXB-AP-1000
LED indicator
TCP/IP (RJ-45) port
USB (mini-B) port
for system status
–
11