Table of Contents
Advertisement
4.
Scroll to Default VM.
Press the Select Key.
The Default VM list appears.
5.
Scroll to 2:Custom.
6.
Press the Select Key.
The display returns to the top of the Setup Options submenu.
7.
Cycle power to implement VM 2 as the default virtual matrix.
Or change the virtual matrix (see page 62) to immediately execute operations on the new default
virtual matrix without cycling power. (The next time power is cycled, VM 2 will be implemented as
the default virtual matrix.)
Reload Config
The Reload Config option is not used in normal operations. Use this option only when loading local
presets to the Control Panel (or when directed to do so by technical support).
To reload the configuration file to the Control Panel:
1.
Press the Function Key.
The Function menu appears.
2.
Locate Setup Options by scrolling with the Control Dial.
3.
Press the Select Key.
The Setup Options submenu appears.
4.
Scroll to Reload Config.
S e t u p
. R e l o a d
5.
Press the Select Key.
The configuration file reloads to the Control Panel and the display returns to the top of the Setup
Options submenu.
6.
Press the Function Key to return to the Function menu.
Epica DGX 16 and Epica DGX 32 Instruction Manual
O p t i o n s :
C o n f i g
Control Panel Operation
Current default virtual matrix
75
Advertisement
Table of Contents
