Installing The Batteries - Thermo Scientific Orion Star User Manual

Meter Preparation

Installing the Batteries

Orion Star and Star Plus series meters use four AA alkaline batteries . Do not use
lithium or rechargeable batteries . Improper installation of non-alkaline batteries
could create a hazard .
Note: For benchtop meters, the installation of batteries is not required if the unit
will always be connected to a power source via the universal power supply. For
portable meters, the batteries are supplied from the factory. To access the battery
compartment in portable meters, loosen the two screws in the back of the meter.
1 . Confirm that the meter is off and gently place the meter upside down
on a clean, lint-free cloth to prevent scratching the display .
2 . Remove the battery case cover .
3 . Insert new batteries with the + side orientation as depicted in the battery
compartment housing .
4 . Replace the battery case cover .
5 . Stored data, calibrations and methods will remain in the meter's nonvolatile
memory when the batteries are being replaced . However, the date and time
may need to be reset when the batteries are changed .
EN-8 Thermo Scientific Orion Star and Star Plus Meter User Guide
™