Thermo Scientific Orion Star User Manual page 19

Top Line Middle Line
rEAd tyPE
rEAd tInE
L0g dEL
L0g AUt0
gEn dEgC
gEn StIr
gEn PASS
gEn AUt0
gLP SEt
dAtE H0Ur
dAtE tInE
dAtE tYPE
dAtE YEAr
dAtE dAtE
dAtE dAY
r232 bAUd
r232 0UtF
AUt0 SAPL
AUt0 trAY
AUt0 rInb
AUt0 rSEC
AUt0 PH
AUt0 0rP
AUt0 ISE
1 AUt0
10 AUt0
100 AUt0
AUt0 C0nd
AUt0 n0SA
Thermo Scientific Orion Star
Bottom Line
AUt0, tImE, C0nt,
00:05 to 99:59
n0, YES
0FF, 0n
-5.0 to 105
0FF, 1, 2, 3, 4, 5, 6, 7
0000 to 9999
0n, 0FF
0FF, 0n
HH00 to HH23
mm00 to mm59
mdY, dmY
2000 to 2099
mm01 to mm12
dd01 to dd31
1200, 2400, 4800, 9600
Prnt, C0mP
0FF, 0n
28, 48
1, 2, 3, 4, 5
5 to 60
0, 1, 2, 3
n0, YES
0, 2, 3
ISE1
ISE2
ISE3
0, 1, 2, 3
0 to 47
and Star Plus Meter User Guide
™
Setup Menu Description (default setting, method specific)
Measurement read type as AUTO-READ, timed or continuous
(AUt0, yes)
Timed measurement value in minutes and seconds (01:00, yes)
Note: This submenu is only available when the timed
measurement read type is selected.
Delete datalog after download option, select YES to delete the
datalog when it is downloaded or select nO to overwrite the oldest
data when the datalog is full and not delete the datalog when
it is downloaded (n0, yes)
Automatic datalog point saving option (0FF, yes)
Manual temperature value (25.0, yes)
Stirrer speed – 3, 4 and 5 Star benchtop meters only (4, yes)
Meter password entry (0000, yes)
Automatic meter shutoff option (0n, no)
GLP option, GLP feature enables or disables methods (0FF, no)
Hour setting (HH12, no)
Minute setting (mm00, no)
Date format as month, day, year or day, month, year (mdY, no)
Year setting (2004, no)
Month setting (mm01, no)
Day of the month setting (dd01, no)
Baud rate setting (9600, no)
Output format for printer or computer, COmP format is comma
delimited (Prnt, no)
Autosampler – 3, 4 and 5 Star Plus benchtop meters only (OFF, no)
Beaker tray setting (28, no)
Number of rinse beakers (3, no)
Rinse time in each rinse beaker, seconds (10, no)
pH calibration points (3, no)
ORP calibration option, appears if 0 was selected for PH (n0, no)
ISE calibration points, appears if 0 was selected for PH (2, no)
Concentration value of ISE standard 1, appears if 2 or 3 was
selected for the ISE calibration points (1, no)
Concentration value of ISE standard 1, appears if 2 or 3 was
selected for the ISE calibration points (10, no)
Concentration value of ISE standard 1, appears if 3 was selected
for the ISE calibration points (100, no)
Conductivity calibration points (3, no)
Number of sample beakers (1, no)
Meter Setup
EN-13