Thermo Scientific Orion Star User Manual page 39

Setup Menu for RDO Optical Probe
The RDO optical dissolved oxygen meters have a special setup menu feature that
allows the user to print information about the RDO optical probe .
Top Line Middle Line
Pr0b d0
Pr0b d0
Pr0b d0
Pr0b d0
Pr0b d0
Pr0b d0
1 . Connect the meter to a printer or computer and verify the meter baud rate
and output settings in the setup menu .
2 . From the measurement mode, press
3 . Press /
on the top line and
4 . Press two times to move the arrow icon to the bottom line .
5 . Press /
for the RDO probe calibration information,
calibration information,
the RDO method information and
6 . Press to print the selected option .
Thermo Scientific Orion Star
Bottom Line Setup Menu Description
tESt The tESt option initiates a 30 second test of the communication link
between the RDO probe and meter. The temperature display will show a
30 second countdown as the test progresses. The meter will send a report
to the printer or computer when the test is done.
CAL The CAL option prints the meter serial number, date, time and slope for the
last five dissolved oxygen calibrations that were performed with the RDO
probe that is currently connected to the meter.
dFLt The dFLt option prints the factory calibration information for the RDO probe
that is currently connected to the meter.
SLP The SLP option prints a drift per minute value of the slope for the last five
dissolved oxygen calibrations that were performed with the RDO probe
that is currently connected to the meter.
mEtH The mEtH option prints the RDO specific method information of the last
method used for the RDO probe that is currently connected to the meter.
InF0 The InF0 option prints the RDO probe information, including the probe
serial number and revision, probe and optical cap date of manufacturing,
cap start date, cap life and internal real time clock for the probe that is
currently connected to the meter.
to scroll through the setup menu until
is displayed on the middle line .
to scroll through
for the RDO probe slope information,
and Star Plus Meter User Guide
™
RDO Optical Dissolved Oxygen Technique
®
.
for the communication link test,
for the RDO probe factory
for the general RDO probe information .
is displayed
for
EN-33