Back Panel Configuration - Albatron KX600A Series User Manual

Back Panel Configuration

PS/2 Mouse & PS/2 Keyboard Connectors: KB/MS
This mainboard provides a standard PS/2 mouse connector and PS/2 Keyboard connector. The pin
assignments are described below:
USB & LAN Connectors: USB & USB/ (LAN is optional)
There are four USB connectors on the back panel. These USB connectors are used to attach to USB
devices such as: keyboards, mice and other USB devices. You can plug the USB devices directly into
this connector. The KX600A PRO and KX600A-GE also provide a LAN port. You can plug LAN
devices directly into this connector.
Pin Assignment
1 Data
2 No connect
3 Ground
Pin Assignment
1 TX+
2 TX-
3 RX+
4 NC
Pin Assignment
1/5 +5 V (fused)
2/6 USBP0-/P1-
12
KX600A Series
Pin Assignment
4 +5 V (fused)
5 Clock
6 No connect
Pin Assignment
5 NC
6 RX-
7 NC
8 NC
Pin Assignment
3/7 USBP0+/P1+
4/8 Ground