Agilent Technologies 3070 System Installation Manual page 81

Chapter 2: MS Windows System Installation Reference: Standard Config File Specifics
© Agilent Technologies 2001–2003
Table 2-13 Some <
enable keywords
enable <keywords>
drivethru
express fixturing
flash70
flash isp
incircuit test
magic
multiple board
versions
paneltest
pld isp
polarity check
powered testing
silicon nails
Agilent 3070 System Installation Manual (MS Windows Version)
> statements in the standard config file
Functional Description:
Enables the testing of digital devices through series resistors using Agilent TestJet
technology. You can use the Agilent Drive Thru Test in combination with the
Agilent Access Consultant to identify and selectively remove nonessential probing
locations.
Allows Agilent SimPlate Express or cassette fixtures for your board test. If this
option is not enabled, only an Agilent SimPlate Fixture can be used.
Enables flash memory programming mode.
Enables flash isp software, which supports new data formats. Only supported with
ControlXTP cards.
Enables automatic in-circuit test generation for systems which do not have it.
Enables Agilent MagicTest circuit analysis mode.
Enables Agilent Multiple Board Versions.
Enables software that helps you develop tests for multiple-board panels on one
fixture.
Enables native PLD programming on the 3070 and supports CPLD programming
with STAPL, SVF, Jam and JBC file types. Only supported with ControlXTP cards.
Enables Agilent Polarity Check testing.
Allows limited powered testing on an Agilent 3072 system (a maximum of two
HybridPlus Cards, one HybridPlus and one ChannelPlus Card, or one HybridPlus
and one AccessPlus Card per module).
Enables automatic generation of silicon nails ITL test files derived from library tests
and customized to the board topology on user selected devices.
2-33