Agilent Technologies 3070 System Installation Manual page 60

Chapter 2: MS Windows System Installation Reference: Editing Files
© Agilent Technologies 2001–2003
Table 2-6 Resolve the standard config file from the system config file (continued)
Task
6 Paste the copied text in the
standard config file:
7 Verify that each
un-commented
module
and
<number> end module
statement in the system
config file is un-commented
in the standard config file.
8 Save , then exit the standard
config file:
Agilent 3070 System Installation Manual (MS Windows Version)
Step
CAUTION
✸
Do not delete the
! Specify instrument ...
! connect ...
a Activate the window containing the standard config file by clicking on the
window border.
b Press F1 on the keyboard to enter the workspace.
c Move the cursor immediately below the
corresponds to the
module <number>
Take care not to overwrite other lines.
I
d Click the right mouse button.
The text from the buffer will be inserted into the standard config file.
a In the window containing the standard config file, press F1 to return to the
command line.
b Enter:
1) re-save
2) exit
through
statements.
module <number>
statement copied in the previous task.
statement that
2-12