Agilent Technologies 3070 System Installation Manual page 59

Chapter 2: MS Windows System Installation Reference: Editing Files
© Agilent Technologies 2001–2003
Table 2-6 Resolve the standard config file from the system config file (continued)
Task
3 Open the system config file
in a new BT-BASIC window:
4 Arrange the two BT-BASIC
windows so that each can be
readily accessed.
5 Copy the appropriate
statements from the system
config file to the clipboard
buffer:
Agilent 3070 System Installation Manual (MS Windows Version)
Step
• At the new BT-BASIC window command line, enter:
get btgetenv$ ("AGILENT3070_ROOT") & "/diagnostics/th1/config"
In the BT-BASIC window containing the system config file:
a Press F1 on the keyboard to enter the workspace.
b Locate the
module <number>
statements using the arrow keys or the Prev and Next keys.
cards 1 ...
c Scroll the text up until the
d Click and drag with the mouse to highlight the text including the
statement
The highlighted text is now copied in the clipboard buffer.
NOTE
Do not include ,
probe
These statements are not valid in the standard config file.
that contains un-commented
statement is visible.
end module
, , or
debug port bank end bank
ports ...
statements.
2-11