Agilent Technologies 3070 System Installation Manual page 58

Chapter 2: MS Windows System Installation Reference: Editing Files
© Agilent Technologies 2001–2003
Table 2-5 Edit the system config file to match the testhead configuration
Task
3 Save and exit the system
config file.
4 Compile the system config
file.
How to Resolve the Standard Config File from the
System Config File
If the system config file has changed, it is good practice
to edit the standard config file to reflect the changes as a
service to the board test development personnel.
See Table 2-6 to resolve the standard config file from
the system config file.
Table 2-6 Resolve the standard config file from the system config file
Task
1 Make a backup copy of the
standard config file:
2 Open the standard config
file:
Agilent 3070 System Installation Manual (MS Windows Version)
Step
• Enter:
1) re-save
2) exit
For instructions, see Compiling the System and Standard Config Files
page 2-35.
Figure 2-1
The desired end result is to copy the
ports
from the system config file to the standard config file.
No changes to the system config file are made.
Step
a Open a BT-BASIC window by double-clicking the desktop icon.
b At the prompt, enter:
msi btgetenv$ ("AGILENT3070_ROOT") & "/standard"
c
copy config over config.temp
a Enter:
get btgetenv$ ("AGILENT3070_ROOT") & "/standard/config"
on page 2-14 illustrates the concept.
..., and
supplies ... ports ...
on
,
cards ... serial
statements
2-10