Agilent Technologies 3070 System Installation Manual page 80

Chapter 2: MS Windows System Installation Reference: Standard Config File Specifics
© Agilent Technologies 2001–2003
The < > Statements
enable keywords
These statements are used in combination with
codewords to selectively enable software features.
CAUTION
✸
< > statements should exist after
enable keywords
the <
target keywords
outside of a module block.
The programmer will un-comment the correct
< > statements which correspond to standard
keywords
Table 2-13 Some <
enable keywords
enable <keywords>
advanced boundary scan
all high accuracy
resources
combo test
common delimiter
connect check
dual well shared
wiring
Agilent 3070 System Installation Manual (MS Windows Version)
> statements, and must be
enable
> statements in the standard config file
Functional Description:
Enables you to test chains of boundary scan parts, such as testing the
interconnections without nailed access.
For double density, high accuracy HybridPlus Cards, this option enables channel
resources to be routed to pins that would otherwise be used for extended grounding
on XG-50 fixtures. Because the resource assignments change, this option cannot be
used with XG-50 fixtures.
Enables both in-circuit and functional test.
Enables interoperability between UNIX and MS Windows
Enables Agilent Connect Check.
Enables dual-well shared wiring.
or optional software features as the board config file is
developed.
NOTE
Codewords must be installed to enable optional
software features. For more information, see
Codewords & Software License Keys
page 2-24.
Table 2-13 contains some enable <
statements in the standard config file.
on
>
keywords
2-32