Table of Contents
Advertisement
essentially straight. This avoids bending the paper around curves
in the paper path and enables feeding of up to 203g/m² media.
T
C
HE
ONTROL
1
2
3
C
A
OPY
REA
1. Zoom
2. Copy Quality
3. Density
4. Copy Count
LCD
F
AND
UNCTION
5. Copy Count
6. Copy Mode
7. Scan Mode
8. Additional
Settings
9. Up/Down/Left/
Right Keys
P
ANEL
4
5
7
Used to increase or decrease scaling in 1%
increments up to 400% and down to -25%.
A further choice of scaling can be made from
preset percentages.
Used to select copy quality.
Used to change the density level.
Used to enter copy quantity or e-mail address.
A
REA
Indicates the number of copies selected.
Used to select copy mode.
Used to select the Scan mode (also the default
working mode).
Used to execute additional settings of "Copy"
and "Scan" modes. (The settings are available
only for three minutes. After three minutes, the
settings will automatically return to the default
value).
Used to move the cursor in the LCD up/down/
left/right. The up/down keys are used to switch
function indication. The left key is used to return
to the upper level of the setting. The right key is
used to go to the lower level of the setting.
Introduction> 11
6
9
11
10
12
14
16
8
18
19
20
Advertisement
Table of Contents
