Table of Contents
Advertisement
5.
Print a menu map as follows:
(a)
(b)
(c)
(d)
6.
Examine the first page of the menu map.
Near the top of the page, between the two horizontal lines,
you will see the current printer configuration. This list
should indicate that the duplex unit is now installed.
All that remains is to adjust the Windows printer driver to
make full use of the new features.
M
EMORY UPGRADE
This section explains how to install additional RAM memory
into your MFP as a memory upgrade.
O
RDER CODES
Use the following order codes for additional memory:
>
256MB RAM – 01110302
The model comes equipped with 128MB of main memory (64Mb
plus 64Mb). This can be upgraded with an additional memory
board containing 256MB, giving a maximum total memory
capacity of 320MB.
Installation takes a few minutes, and requires a medium size
cross-head (Philips type) screwdriver.
1.
Switch the machine off and disconnect the AC power
cable.
Press the + button to access the Information Menu.
Press ENTER once for the menu map.
Press ENTER again to print the menu map.
When the menu map is printed, press ON LINE to
exit the menu system.
Installing upgrades> 89
Advertisement
Table of Contents
