Table of Contents
Advertisement
8.
Identify the RAM expansion slot (1) in the machine.
9.
The RAM expansion slot already contains a memory
board. It will have to be removed before you can install
the new one. To remove it proceed as follows:
(a)
Identify the locking clips (2) at each end of the RAM
expansion slot (1).
(b)
Push the clips outward and back into the machine.
The board will pop out slightly.
(c)
Grip the board firmly by its short edges and pull it
out of the slot.
(d)
Place the removed memory board in the antistatic
bag which originally contained the new memory
board.
10.
Hold the new memory board by its short edges, so that
the edge connector faces in towards the RAM expansion
slot, and the small cutout is closer to the bottom of the
machine.
11.
Gently push the board into the RAM expansion slot until it
latches in and will not go any further.
12.
Locate the three retaining clips at the bottom of the side
cover into their rectangular holes near the bottom of the
machine.
1
2
Installing upgrades> 92
2
Advertisement
Table of Contents
