Table of Contents
Advertisement
13.
Close the front cover and close the top cover, pressing
down firmly at each side to latch it closed.
14.
Reconnect the AC power cable and switch the printer on.
15.
When the printer is ready, print a menu map as follows:
(a)
Press the + button to access the Information Menu.
(b)
Press ENTER once for the menu map.
(c)
Press ENTER again to print the menu map.
(d)
When the menu map is printed, press ON LINE to
exit the menu system.
16.
Examine the first page of the menu map.
Near the top of the page, between the two horizontal lines,
you will see the current printer configuration. This should
now indicate that the hard disk unit is installed.
All that remains is to configure the Windows printer driver so that
it knows the hard disk unit has been fitted, and the additional
features can be made available immediately.
Installing upgrades> 96
Advertisement
Table of Contents
