Table of Contents
Advertisement
H
ARD DISK DRIVE
The optional 20GB internal hard disk drive (HDD) enables
collating of printed pages and can be used to store overlays and
macros, fonts, and secure or proof documents waiting to be
printed.
Installation takes a few minutes, and requires a medium size
cross-head (philips type) screwdriver.
1.
Switch the printer off and disconnect the AC power cable.
2.
Press the cover release and open the printer's top cover
fully.
If the printer has been powered on recently, the fuser will
be hot. This area is clearly labelled. Do not touch.
3.
Lift the front cover latch and pull open the front cover.
4.
Remove the screw securing the right-hand side cover.
WARNING!
Installing upgrades> 94
Advertisement
Table of Contents
