Table of Contents
Advertisement
S
O
CANNER
PERATION
1.
Start your scanning application.
2.
Select the File menu and choose Select Source.
If the Select Source command is not available on the File
menu, see your application's user's guide to determine
how the TWAIN link is used. A dialogue box with a list of
scanning sources appears.
3.
Select C55x0.
You need to select the source only once, unless you want
to choose another scanner.
4.
Place the document face DOWN on the document glass or
face UP in the ADF.
5.
Select the File menu and choose Acquire.
A dialogue box containing scanning features appears.
6.
Select the scanning method you want to use from the
Scan Method (1) drop-down menu.
7.
Select the mode you want to use for your scans from the
Image Type (2) drop-down menu.
8.
Select a scanning resolution from the Resolution (3)
drop-down menu.
9.
Select the setting for the scanning features (e.g. Sharpen,
Descreen, etc.) that you want to use (see "enhancing your
image" later in this Chapter).
Operation> 58
1
2
3
Advertisement
Table of Contents
