Dismounting The Fs-C (Windows) - Focus FS-C User Manual

FS-C Using with a Computer

Dismounting the FS-C (Windows)

When finished working with the FS-C and the computer, it is
necessary to dismount FS-C from the system
To do dismount the FS-C:
1. Click the
Safely Remove Hardware
the Windows task bar as shown below.
Unplug or Eject Hardware Icon
(Safely Remove Hardware)
2. Next, the computer system prompts to remove the connected
FS-C. This begins the dismount process.
3. Select the message and click on it.
The computer dismounts the FS-C and then displays a message
that it is now safe to remove the unit.
44
Dismount FS-C Before Powering Off
It is important to dismount the FS-C from the Windows system
BEFORE powering down the unit.
icon at the bottom right side of
FS-C Portable DTE Recorder