Focus FS-C User Manual page 114

FS-C Functions
• Use the
Reels. For example, if the current Reel selection is 3.
pressing
To purchase the wired remote control, p/n
, for the FS-C, visit Focus Enhancements web site at
01
www.focusinfo.com/sales/store/.
• Syncro Slave
Use this mode when the camcorder does not have FS-C
compatible external control or the tapeless trigger
functionality. In
FS-C mimics the camcorder's operations by monitoring
the camcorder's tape record state.
• AV/C
Do Not Use AV/C control in Record Mode
Use AV/C in playback mode and other situations
where the FS-C is controlled by an external FireWire
device such as a NLE system that is not supported by
Direct To Edit Technology. In these cases, the FS-C can
be used in a manner similar to a camcorder to capture
footage to the NLE.
the QUICKTIME HD FORMAT is selected, the type of
timecode reported is defined by the HDV TC TYPE setting,
refer to
• Tapeless
The Tapeless Control mode allows the FS-C to be
controlled from a camcorder, if it features a FS-C
compatible external control setting separate from the
tape transport. Use Tapeless Control mode with the
companion Canon HDV camcorder.
Camcorder Requirements for Tapeless Control Mode
Tapeless Control mode will not work unless it is supported by the
camcorder and the camcorder is placed in this external control mode.
Please check your camcorder manual for more details.
98
Keeper
changes the selection to Reel 4.
Keeper
Syncro Slave
When in HD RECORDER mode, and
on page 74.
HDV TC TYPE
key to cycle through the available
control mode, the
FS-C Portable DTE Recorder
ACSS-0019-