Initial Setup - Focus FS-C User Manual

FS-C Using with a Computer
To move video files from the FS-C to a computer:
• Connect the FS-C's
computer with an active OHCI compliant IEEE-1394
FireWire port and the necessary FireWire disk drive
drivers.
For More Information
Go to the FOCUS Enhancements' website (www.focusinfo.com) for
more compatibility information.
• Use the FS-C HDD Bypass mode, refer below for more
information.
The FS-C is compatible with any computer system that can
read FAT 32 volumes, such as Windows 98SE/ME/2000/XP
and Mac OS9/OS10.

Initial Setup

1. Connect the FS-C through its
computer system using a standard 6-pin to 6-pin FireWire cable.
2. Enter HDD mode and enable DD Drive.
This step is required before mounting the FS-C to a computer.
• On the FS-C go to the
• Select
• Press
Refer to the section,
3. Connect power to the drive if necessary.
4. Consult the computer's documentation for more information.
36
Computer I/O
COMPUTER I/O
HDD
and
DD Drive Right
function button.
Enable
HDD Mode Screen
1394 port directly to a
1394 port to the
screen.
arrow to
Connect
on page 60
FS-C Portable DTE Recorder
screen.