Fixing The Spacer Bars; Granite Worktops; Fixing The Spring Clamps - Miele KM 400 Installation Instructions Manual

Fixing the spacer bars

c
^ Position the spacer bars b in the
positions shown in "Fitting the spacer
bars and spring clamps" so they are
flush with the top edge of the cut-out,
and secure with the 3.5 x 25 mm
screws supplied.
^ Then fill in gap c between the bars
and the worktop with silicone from
the tube supplied.

Granite worktops

^ With granite worktops the spacer
bars b must be positioned and
secured with strong double-sided
adhesive tape. In addition, coat the
edges with silicone and fill in gap c.
The screws are not required for granite
worktops.
d

Fixing the spring clamps

^ Position the spring clamps a in the
positions shown in "Fitting the spacer
bars and spring clamps" so that they
are flush with the top edge of the
cut-out, and secure with the
3.5 x 25 mm screws supplied.
Granite worktops
^ With granite worktops, the spring
clamps a must be positioned and
secured with strong double-sided
adhesive tape. In addition, coat the
edges with silicone.
The screws are not required for granite
worktops.
Installation
13