Installing On Openserver And Unixware; Installing On Solaris - Adaptec Command Line Utility User Manual

Change to the Debian manager directory:
3
cd /mnt/cdrom/ASMCD/debian_x86_64/manager
Install the .deb package:
4
dpkg -i storman_6.50-15653_amd64.deb (for 64-bit systems)
Unmount the RAID Controller Installation DVD:
5
umount /mnt/cdrom

Installing on OpenServer and UnixWare

To install on OpenServer and UnixWare systems:
ARCCONF
Insert the Adaptec RAID Controller Installation DVD.
1
Mount the Adaptec RAID Controller Installation DVD:
2
mount -r -F cdfs /dev/cdrom/cdromdevicefile /mnt
where
cdromdevicefile
device. To determine the actual filename, look in the /dev/cdrom directory.
Use pkgadd to install Adaptec Storage Manager:
3
pkgadd -d /mnt/ASMCD/unixware/manager/RaidMan.ds (for UnixWare)
pkgadd -d /mnt/ASMCD/openserv6/manager/RaidMan.ds (for OpenServer 6)
Follow the instructions on the screen to complete the installation.
4
Unmount the RAID Controller Installation DVD:
5
umount /mnt

Installing on Solaris

To install ARCCONF on Solaris systems:
Insert the Adaptec RAID Controller Installation DVD.
1
The DVD mounts automatically. (If it doesn't, manually mount the DVD using a
command similar to the one shown below. Refer to your operating system documentation
for detailed instructions.)
mount -F hsfs -o ro/dev/dsk/c1t0d0s2/mnt
Install Adaptec Storage Manager:
2
pkgadd -d/<mount point>/ASMCD/solaris_x86/manager/StorMan.pkg
Follow the on-screen instructions to complete the installation.
3
Eject or unmount the RAID Controller Installation DVD. Refer to your operating system
4
documentation for detailed instructions.
Chapter 1: Getting Started with the Command Line Utility
is the device file, for example, c0b0t010, for a DVD-ROM block
10
●