Available Properties And Values; Example Command Line Installations - Adaptec 5405 User Manual

Available Properties and Values

Property
INSTALLDIR
(Not required)
ADDLOCAL
(Required)
REBOOT
(Not Required)

Example Command Line Installations

To install all DAS options, which include the Console, Agent, Readme, and SNMP Support:
●
setup asm x86.exe /s /v"/qn ADDLOCAL=Console,Agent,,ASMReadme,SNMPSupport"
To install just the Agent and suppress a reboot at the end of installation:
●
setup asm x86.exe /s /v"/qn ADDLOCAL=Agent REBOOT=ReallySupress"
To install only the CLI Tools and suppress a reboot:
●
setup asm x86.exe /s /v"/qn ADDLOCAL=CLITools REBOOT=ReallySuppress"
To install the GUI feature to a different installation path:
●
setup asm x86.exe /s /v"/qn ADDLOCAL=Console INSTALLDIR=\"C:\Adaptec Storage
Manager\""
To install and have setup wait until the install finishes before it closes:
●
start /WAIT setup asm x86.exe /w /s /v"/qn ADDLOCAL=Console,Agent
REBOOT=ReallySupress"
Appendix A: Completing a Silent Windows Installation
Values
Specifies the installation path. If you are specifying the installation path, it must be
set for a command line install, and must be enclosed in escaped quotation marks.
For example:
INSTALLDIR=\"C:\Program Files\Adaptec\Adaptec Storage Manager\"
Note: If you do not explicitly set the installation path, the default path is
"C:\Program Files\Adaptec\Adaptec Storage Manager"
Note: Use commas to separate multiple values.
ALL—Installs all of the following features. If you specify ALL, do not also specify any
●
of the following values.
Agent—Installs the Adaptec Storage Manager Direct Attached Storage Agent. If this
●
feature is installed, your system will reboot if RAID controllers that use the filter
driver are installed. If necessary, use the REBOOT property to suppress this.
ASMReadme—Installs the Readme file in its Start menu shortcut.
●
CLITools—Installs the Command Line Interface tool.
●
Console—Installs the Adaptec Storage Manager GUI.
●
SNMPSupport—Installs SNMP support for Adaptec Storage Manager. Requires the
●
Agent feature to be installed. If you select the SNMPSupport feature, the Agent
feature is automatically included, even if you don't specify it.
Force—Forces a reboot at the end of the installation.
●
Suppress—Suppresses a reboot unless files were in use and could not be
●
overwritten during installation.
ReallySuppress—Suppresses all reboots at the end of the installation.
●
NOTE: A reboot is only forced by the Adaptec installer if you have installed the DSM or
if any files can't be overwritten.
151
●