Getting Started with the Command
Line Utility
In this chapter...
Installing the Command Line Utility ...................................................................................... 7
Starting the Command Line Utility ........................................................................................ 9
This chapter explains how your Adaptec product supports the use of one of these command
line utilities:
ARCCONF—for Adaptec RAID controllers
●
HRCONF —for Adaptec HostRAID products
●
Each utility allows you to:
Create and delete logical drives
●
Display and modify a limited set of configuration settings
●
Copy configurations from one computer to another
●
Recover from a failed physical device and rebuild an affected logical drive
●
Flashes new firmware and BIOS onto the controller
●
Enables the controller to check the removal and connection of any disk drives
●
Restores the controller configuration (HRCONF only)
●
Automatically update Windows drivers (ARCCONF only)
●
Provides access to the status and event logs of a controller (ARCCONF only)
●
Isolate problems and determine their causes (ARCCONF only)
●
1