Arcconf Getlogs - Adaptec Command Line Utility User Manual

Physical device state
●
Number of Solid State Disks (SSDs) assigned to MaxIQ pool, maximum number of SSDs
●
that can be assigned to MaxIQ pool
Enclosure information: fan, power supply, and temperature status
●
Syntax
ARCCONF CONFIG <Controller#> [AD|LD [LD#]|PD|AL]
Parameters
Controller# is the controller number
AD/LD/PD/AL options:
AD—Adapter information only
●
LD—Logical drive information only
●
PD—Physical device information only
●
AL—All information (optional)
●
Example
ARCCONF GETCONFIG 1 AD

arcconf getlogs

Provides access to controller status and event logs and usage statistics, including:
DEVICE—A log of device errors that the controller encountered.
●
DEAD—A log that records any occurrences of defunct devices.
●
EVENT—A log of special events that may have occurred (rebuilds, LDMs, etc.).
●
STATS—A log of controller usage statistics.
●
Syntax
ARCCONF GETLOGS <Controller#> <Type> [clear|tabular]
Parameters
Controller# is the controller number.
Type is one of the following:
DEVICE
●
DEAD
●
EVENT
●
STATS
●
Clear clears the specified log.
Note:
This option is valid only for the DEVICE, DEAD, and EVENT log types.
Tabular displays the log or statistics in tabular format.
Examples
ARCCONF GETLOGS 1 DEVICE
Chapter 2: Using the Command Line Utility
18
●