Getting Started with the
Command Line Utility
In this chapter...
Installing the Command Line Utility.................................................. 8
Starting the Command Line Utility .................................................... 9
This chapter explains how your Adaptec product supports the use of
one of these command line utilities:
ARCCONF - for Adaptec RAID controllers
●
HRCONF - for Adaptec HostRAID products
●
Each utility allows you to:
Create and delete logical drives
●
Display and modify a limited set of configuration settings
●
Copy configurations from one computer to another
●
Recover from a failed physical drive and rebuild an affected logical
●
drive
Flashes new firmware and BIOS onto the controller
●
Enables the controller to check the removal and connection of any
●
disk drives
Restores the controller configuration (HRCONF only)
●
Automatically update Windows drivers (ARCCONF only)
●
Provides access to the status and event logs of a controller
●
(ARCCONF only)
Isolate problems and determine their causes (ARCCONF only)
●
1