Adaptec Command Line Utility User Manual page 13

Using the Command Line Utility
In this chapter...
ARCCONF Commands ......................................................................................................... 14
This chapter explains how to use the command line utility interactively or in batch mode. With
interactive mode, enter commands at the prompt. In batch mode, create scripts and run the
script in the appropriate shell. For example:
Environment
Windows
Linux/Unix
In either mode, if your command fails, you immediately see an error message of Command
failed. Other script messages that you can get are Command completed successfully, or
Command aborted.
The return values for each command are the same:
0x00: SUCCESS
0x01: FAILURE - The requested command failed
0x02: ABORT - The command was aborted because parameters failed validation
0x03: INVALID_ARGUMENTS - The arguments are incorrect. (Displays COMMAND help)
Available commands are described on the following pages, in alphabetical order. To access a list
of commands, type
To access the online help for a specific command, type
Batch File
.bat
.sh
and press Enter.
ARCCONF
Run Script
CMD.EXE
sh / bash
<command>, then press Enter.
ARCCONF
2