Arcconf Datascrub; Arcconf Delete - Adaptec Command Line Utility User Manual

RAID# indicates the RAID level for the new logical drive. 0, 1, 1E, 10, 5, 5EE, 50, 6, 60, and
volume are supported.
Channel# Drive# lists the space-delimited channel number and device number pairs for each
device to add to the logical drive.
Rvolume is the RAID level for a RAID volume logical drive.
LD# is the logical drive numbers for two or more logical drives to be concatenated into the
RAID volume.
Noprompt: No prompt for confirmation
Examples
ARCCONF CREATE 1 LOGICALDRIVE STRIPESIZE 64 MAX 0 1 0 2 0 3 2 NOPROMPT
ARCCONF CREATE 1 JBOD 0 1 NOPROMPT

arcconf datascrub

Toggles the background consistency check modes of the controller.
Syntax
ARCCONF DATASCRUB <Controller#> <on|off|period <DAYS>> [noprompt]
Parameters
Controller# is the controller number.
On turns background consistency check on.
Off turns background consistency check off.
Period <DAYS> sets the number of days to complete the background consistency check. The
minimum value is 10 days (quick), the maximum is 365 days (slow). Setting the period
automaically turns background consistency check on.
Noprompt is an optional parameter that suppresses the confirmation prompt.
Examples
ARCCONF DATASCRUB 1 PERIOD 30
ARCCONF DATASCRUB 1 OFF

arcconf delete

Deletes a logical drive or JBOD. All data stored on the logical drive or JBOD will be lost.
Spanned drives cannot be deleted with this function.
Syntax
ARCCONF DELETE <Controller#> LOGICALDRIVE <LogicalDrive#> <LD#> <LD#> [noprompt]
ARCCONF DELETE <Controller#> JBOD <CHANNEL# DRIVE#> [CHANNEL# DRIVE#] ...
[noprompt]
ARCCONF DELETE <Controller#> LOGICALDRIVE|JBOD ALL [noprompt]
Parameters
Controller# is the controller number
LogicalDrive# is the number of the logical drive to be deleted.
Chapter 2: Using the Command Line Utility
16
●