Download Print this page

Worktop Cut-Out Aus/Nz - Miele KM 440 Operating Instructions Manual

Hide thumbs


Installation instructions

Worktop cut-out AUS/NZ

Cut the worktop according to the
dimensions in the relevant diagram,
keeping within the tolerances given.
Ensure that there is a depth of at
least 64 mm at the rear right for the
connecting cable.
Ensure that there are minumum dis-
tances of 50 mm between the rear
wall and the hob and 40 mm be-
tween a right or left side wall and the
Seal the cut surfaces with a suitable
sealant to avoid swelling caused by
moisture. The materials used must
be heat-resistant.

Hide quick links:



This manual is also suitable for:

Km 441Km 443Km 441