Worktop Cut-Out - Miele KM 440 Operating Instructions Manual

Installation instructions
Installation instructions

Worktop cut-out

22
Cut the worktop according to the
dimensions in the relevant diagram,
keeping within the tolerances given.
Ensure that there is a depth of at
least 64 mm at the rear right for the
connecting cable.
Ensure that there are minumum dis-
tances of 50 mm between the rear
wall and the hob and 40 mm be-
tween a right or left side wall and the
hob.
Seal the cut surfaces with a suitable
sealant to avoid swelling caused by
moisture. The materials used must
be heat-resistant.