Installing Heidi Driver Software For Autodesk Applications; Verify The Default Video Display Driver - Intergraph Intense3D Wildcat 4210 User Manual

5. In the Install From Disk dialog, type the path to the directory that contains the delivery media.
6. In the Change Display dialog box, verify that the Wildcat 4210 driver is highlighted and then
click OK.
7. Click Yes when asked if you want to install a third-party driver.
8. After the driver files are copied, a message that the driver successfully installed displays.
Click OK.
9. Click Close to exit the Display Type dialog, and again to exit the Display Properties dialog.
10. When told that the computer must be restarted for the new settings to take effect, remove the
diskette from the computer's floppy disk drive, if applicable. Click Yes to restart the
computer.
11. After the computer restarts and you log in, a message displays stating that a new display driver
has been installed, and that you should use the Display option in the Control Panel to select
the preferred display resolution. Click OK.
See Chapter 3, "Using the Video Card," for instructions on defining the display properties.
®
Installing Heidi Driver Software for AutoDesk Applications
The Intense3D Heidi driver software allows full-screen multisampling of and compatibility with
AutoDesk applications, as well as hardware acceleration of the Wildcat 4210 via OpenGL. To
install the Heidi driver software and to activate full screen multisampling, refer to the
on driver Disk 3 or in the Disk 3 folder of the driver CD.

Verify the Default Video Display Driver

To verify the default video display driver in Windows 2000:
1. From the operating system Start menu, go to Settings » Control Panel » Display » Settings.
2. Verify that two Intense3D Wildcat 4210 devices are listed under Display.
3. Click Cancel to close the Display Properties dialog.
See Chapter 3, "Using the Video Card," for instructions on defining the display properties.
To verify the default video display driver in Windows NT 4.0:
1. From the operating system Start menu, go to Settings » Control Panel » Display » Settings »
Display Type.
2. Verify that Intense3D Wildcat 4210 is listed under Display.
3. Click Cancel to close the Display Properties dialog.
See Chapter 3, "Using the Video Card," for instructions on defining the display properties.
11
file
README