Table of Contents
Advertisement
4
To close the face panel:
1.
Position the face panel over the front of the unit to line up the four screws.
2.
Secure the face panel to the base unit by replacing the four screws.
Closing the Base Unit
CAUTION
After servicing or upgrading the system, always replace the covers that were
removed. The covers ensure the system maintains proper air flow, so internal
components do not overheat and fail. The covers also ensure that electromagnetic
interference (EMI) emissions remain below the standard requirements.
To close the base unit:
1.
Remove the antistatic wrist strap from the base unit.
2.
Replace the cover.
Remove these 4 screws, 2 on each side of
the face plate.
Advertisement
Table of Contents
Need help?
Do you have a question about the InterServe 90 and is the answer not in the manual?
Questions and answers