Step 6. Configure Controllers; General - Honeywell Excel 10 W7752D User Manual

Step 6. Configure Controllers

General

This section will provide details on the configuration options
for Excel 10 FCU Controllers. See Appendix C for reference
information.
Using Plug-Ins
The configuration process is primarily performed in a series of
screens seen as file tabs under the menu option Application
Selection and is easily followed using the tables included in
this section. There are 9 file tabs:
EXCEL 10 FCU CONTROLLER LNS PLUG-INS USER GUIDE
1. Output
2. Input
3. Equipment Control
4. Fan
5. Switching Levels
6. Zone Options
7. Miscellaneous
8. PID
9. Wiring (information only, no configuring).
The specific parameters to be configured in each of these four
categories are tabulated in the following subsections. For a
complete list of all Excel 10 FCU Controller NV's, see
Appendix C.
25 EN2B-0285GE51 R0909