Table of Contents
Advertisement
MANUAL TRANSMISSION (E - W) -
Taper roller
bearing
Ball bearing
E
Mitsubishi Motors Corporation
(4) Measure the backlash between the side gear and pinion.
(5) If the backlash is out of specification, select a spacer
"BA LOCK PIN INSTALLATION
Install the lock pin in such a way that it will be oriented in
the direction shown.
"CA TAPER ROLLER BEARING INSTALLATION
MD998812
Use the special tools to install the taper roller bearing.
MD998819
"DA BALL BEARING INSTALLATION <F5M41>
Use the special tools to install the ball bearing.
MD998812
MD998819
"EA DIFFERENTIAL DRIVE GEAR INSTALLATION
(1) Apply a sealant to the entire threaded portion of the bolt.
Jun. 1998
Differential
<F5M41,
Front Differential <W5M42>
Standard value:
0.025 - 0.150 mm
and re-measure the backlash.
NOTE
Adjust until the backlashes on both sides are equal.
<F5M42>
Specified sealant:
3M STUD Locking No. 4170 or equivalent
PWEE9508-E
F5M42>,
22B-15-3
Revised
Hide quick links:
Advertisement
Table of Contents
