Table of Contents
Advertisement
22B-3-8
MANUAL TRANSMISSION (E - W) -
Snap ring
Sealing cap
MB990938
MB990927
E
Mitsubishi Motors Corporation
(2) Install the transmission case and expand the snap ring.
(3) Tighten the transmission case mounting bolts to the
"IA SEALING CAP INSTALLATION
Press-fit the sealing cap all the way up to the illustrated position.
"JA REVERSE IDLER GEAR SHAFT BOLT
Using a screwdriver (8 mm in shaft diameter), center the bolt
hole.
"KA CONTROL HOUSING INSTALLATION
Apply a 1.5 mm bead of sealant to the illustrated position
of the transmission case.
Specified sealant:
Caution
Squeeze out the sealant uniformly, while making sure that
it is not broken or excessively applied.
Nov. 1995
Transmission <F5M41>
specified torque.
NOTE
Place the transmission upside down and let the snap ring
fit in the groove by taking advantage of the output shaft's
own weight.
INSTALLATION
MITSUBISHI genuine sealant part No. MD997740 or
equivalent
PWEE9508-A
Added
Hide quick links:
Advertisement
Table of Contents
