MANUAL TRANSMISSION (E - W) -
Sleeve
Identification mark
Synchronizer hub
Reverse gear
Ball bearing
E
Mitsubishi Motors Corporation
"LA 5TH SPEED GEAR SLEEVE INSTALLATION
MD998812
Use the special tools to install the 5th speed gear sleeve.
MD998813
MD998819
"MA5TH-REVERSE SPEED SYNCHRONIZER HUB
Install the 5th-reverse speed synchronizer hub in such a way
that it will be oriented in the direction shown.
Rear of
trans-
mission
Caution
MD998812
When the 5th-reverse speed synchronizer hub is installed,
make sure that the synchronizer ring is not caught.
MD998813
MD998819
"NA REVERSE GEAR / NEEDLE ROLLER BEARING /
MD998812
MD998818
Use the special tools to install the reverse gear, needle roller
Sleeve
bearing and reverse gear bearing sleeve.
"OA BALL BEARING INSTALLATION
MD998812
Use the special tools to install the ball bearing.
MD998818
Jun. 1998
Output Shaft <F5M42, W5M42>
INSTALLATION
REVERSE GEAR BEARING SLEEVE
INSTALLATION
PWEE9508-E
22B-8-7
Revised