22B-15-2
MANUAL TRANSMISSION (E - W) -
MD998801
MD998801
E
Mitsubishi Motors Corporation
DISASSEMBLY SERVICE POINTS
AA" BALL BEARING REMOVAL <F5M41>
Use the special tool to remove the ball bearing.
AB" TAPER ROLLER BEARING REMOVAL <F5M42>
Use the special tool to remove the taper roller bearing.
REASSEMBLY SERVICE POINTS
"AA SPACER / SIDE GEAR / WASHER / PINION /
(1) After a spacer has been mounted on the back surface
(2) Set the washer on the back of each pinion, and put both
(3) Insert the pinion shaft.
Jun. 1998
Differential
Front Differential <W5M42>
PINION SHAFT INSTALLATION
of the side gear, install the side gear in the differential
case.
NOTE
When a new side gear is to be installed, mount a medium
thickness spacer (0.93 - 1.00 mm).
pinions simultaneously in mesh with the side gears. While
rotating them, install them in position.
PWEE9508-E
<F5M41,
F5M42>,
Revised