Mitsubishi F5M41 Manual page 54

MANUAL TRANSMISSION (E - W) -
MD998801
Snap ring
Synchronizer spring
Identification mark
MD998801
E
Mitsubishi Motors Corporation
"BA BALL BEARING INSTALLATION
MD998812
Use the special tools to install the ball bearing.
MD998813
MD998816
"CA SNAP RING INSTALLATION
Select and install a snap ring so that the input shaft front
bearing end play will have the standard value.
Standard value:
"DA SYNCHRONIZER SPRING INSTALLATION
Install the synchronizer spring securely up to the illustrated
position of the synchronizer ring.
"EA 3RD-4TH SPEED SYNCHRONIZER HUB
Install the 3rd-4th speed synchronizer hub in such a way that
it will be oriented in the direction shown.
Rear of
trans-
mission
Caution
MD998812
When the hub is installed, make sure that the synchronizer
ring is not caught.
MD998813
MD998825
Jun. 1998
Input Shaft <F5M42, W5M42>
- 0.01 - 0.12 mm
INSTALLATION
PWEE9508-E
22B-6-3
Revised