22B-4-6
MANUAL TRANSMISSION (E - W) -
3rd-4th speed
shift rail
Shift fork
Shift rail
Spring pin
Slit
MB990938
MB990935
E
Mitsubishi Motors Corporation
(3) While fitting each shift fork in the sleeve, slide the shift
5th-reverse
speed shift rail
"CA SPRING PIN INSTALLATION
2.5 mm
Install the spring pin such that its slit may face in the axial
direction of the shift rail.
"DA SPACER INSTALLATION
Install the spacer selected in the section "ADJUSTMENT
BEFORE REASSEMBLY".
"EA OUTER RACE INSTALLATION
Use the special tools to install the outer race.
"FA TRANSMISSION CASE INSTALLATION
(1) Apply a 1.5 mm bead of sealant to the illustrated position
Jun. 1998
Transmission <F5M42, W5M42>
rails in the direction shown and install.
of the transmission case.
Specified sealant:
MITSUBISHI genuine sealant part No. MD997740
or equivalent
Caution
Squeeze out the sealant uniformly, while making sure
that it is not broken or excessively applied.
PWEE9508-E
Revised