1St Speed Gear Sleeve Removal - Mitsubishi F5M41 Manual

22B-8-4
MANUAL TRANSMISSION (E - W) -
MD998801
MD998917
MD998801
Snap ring
Sleeve
E
Mitsubishi Motors Corporation
AF" 1ST SPEED GEAR SLEEVE REMOVAL
Use the special tool to remove the 1st speed gear sleeve.
Sleeve
AG" ROLLER BEARING INNER RACE REMOVAL
Inner race
Use the special tool to remove the roller bearing inner race.
REASSEMBLY SERVICE POINTS
MD998812
"AA ROLLER BEARING INNER RACE INSTALLATION
MD998818
Use the special tools to install the roller bearing inner race.
Inner race
"BA SNAP RING INSTALLATION
Select and install a snap ring so that the output shaft front
bearing end play will have the standard value.
Standard value:
"CA 1ST SPEED GEAR SLEEVE INSTALLATION
Use the special tools to install the 1st speed gear sleeve.
MD998812
MD998814
MD998825
Jun. 1998
Output Shaft <F5M42, W5M42>
- 0.01 - 0.12 mm
PWEE9508-E Revised