MANUAL TRANSMISSION (E - W) -
MD998801
Identification mark
MD998801
Identification
groove
Synchronizer hub
E
Mitsubishi Motors Corporation
"HA 5TH SPEED GEAR SLEEVE INSTALLATION
MD998812
MD998813
MD998820
"IA 5TH-REVERSE SPEED SYNCHRONIZER HUB
Install the 5th-reverse speed synchronizer hub in such a way
that it will be oriented in the direction shown.
Rear of
transmission
Caution
MD998812
When the 5th-reverse speed synchronizer hub is installed,
MD998819
make sure that the synchronizer ring is not caught.
"JA SYNCHRONIZER SLEEVE INSTALLATION
(1) Install the synchronizer sleeve in such a way that it will
Rear of
transmission
(2) When the synchronizer sleeve is installed, make sure that
Synchronizer
sleeve
Nov. 1995
Input Shaft <F5M41>
INSTALLATION
be oriented in the direction shown.
the deep groove portion of the synchronizer hub is aligned
with the projecting portion of the sleeve.
PWEE9508-A
22B-5-5
Added