22B-4-8
MANUAL TRANSMISSION (E - W) -
O-ring
Transmission oil
E
Mitsubishi Motors Corporation
"JA SPEEDOMETER GEAR INSTALLATION
Apply transmission oil to the O-ring of the speedometer gear.
Transmission oil:
"KA SELECT LEVER INSTALLATION
Control shaft
Apply grease to the control shaft sliding portion of the select
lever shoe.
Specified grease:
Select
lever shoe
INSPECTION
BACK-UP LAMP SWITCH
(1) Check for continuity between terminals.
(2) If the above requirements are not met, replace the back-up
OIL TEMPERATURE SENSOR <For GDI engine only>
(1) Check for continuity between terminals.
(2) If the standard value is not met, replace the oil temperature
Jun. 1998
Transmission <F5M42, W5M42>
Hypoid gear oil SAE 75W-85W conforming to API
classification GL-4 or higher
MITSUBISHI genuine grease part No. 0101011 or
equivalent
Switch condition
Pressed
Released
lamp switch with a new one.
Temperature (°C)
20
110
sensor with a new one.
PWEE9508-E
Continuity
Not exist
Exists
Standard value (kW)
2.31 - 2.59
0.1451 - 0.1491
Revised