Key Operator Code Number; Key Operator Code Number: Factory Setting - Sharp AR-3551 Operation Manual

KEY OPERATOR CODE NUMBER:

FACTORY SETTING
The following is the factory setting of the Key Operator Code
Number, which must be used to access the Key Operator
Program.
Factory setting = 00000
This number must be entered when accessing the Key
Operator Program for the first time. (See page 6-3 or 6-6.)
NOTE:
The Key Operator Code Number is an important security
number allowing the Key Operator to configure the copier's
functions and auditor's settings.
You should register your own code number — different from
the factory setting above — immediately after your copier is
installed.
KEY OPERATOR
★ ★ ★ ★ ★
Detach this page and store it in a safe place.
7
7-11