Sharp AR-3551 Operation Manual page 30

LOADING PAPER
Setting the paper type and size from the touch panel
1
Press the [CUSTOM SETTINGS] key.
2
Press the [TRAY SETTINGS] key.
TOTAL COUNT
TRAY SETTINGS
3
Select the paper tray for which the setting
is to be made.
TYPE / SIZE
TRAY 1 PLAIN / 8 X11
1 / 2
TRAY 2 PLAIN / AUTO-INCH
TRAY 3
RECYCLED / AUTO-INCH
4
Select the paper type and the paper size.
If TRAY 1 has been selected in step 3:
●
CUSTOM SETTINGS
TRAY 1 TYPE/SIZE SETTING
TYPE
PLAIN
LETTER HEAD
PRE-PRINTED PRE-PUNCHED
RECYCLED COLOR
The highlighted keys indicate the current selections.
To change either type or size or both, touch the
desired keys to highlight the selections.
Paper types
Special papers such as transparency film and
labels can be set for tray 2 and the bypass tray.
Envelopes can be set only for tray 2.
Paper sizes
● Depending on the selected tray, a selection for
"AUTO-AB" and "AUTO-INCH" may appear.
"AUTO-AB": Select when you have set AB system
paper.
1-20
The custom setting menu
screen will appear.
The paper tray selection
screen will appear.
If the desired tray is not
on the display, use [ ] or
[ ] key to scroll the
display until it appears.
OK
SIZE
A4
8
1 11
2
B5
"AUTO-INCH": Select when you have set inch
system paper.
When the paper system is changed from the inch
system to the AB system or vise versa, the paper
type must be designated. Select the paper type.
● If you have set paper of non-standard size, select
"NON STANDARD SIZE". This size key appears
when tray 2 or the bypass tray has been selected
in step 3.
5
Touch the [OK] key to complete the setting.
OK
SIZE
A4