Key Operator Code Number (P19); Registering The Key Operator Code Number - Sharp SD-2060 Key Operator's Manual

KEY OPERATOR CODE NUMBER (P19)

A Key Operator Code Number must be registered before using the
key operator programs. The Key Operator must remember this
number. Only this registered number will allow access to the key
operator programs.
AUDIT
0 /
CLEAR
1
4
7
AUDIT
0 /
CLEAR
COPIES SELECTED
1
4
7
AUDIT
0 /
CLEAR
3
6
9
CLEAR/STOP
C /
2
Downloaded from: http://www.usersmanualguide.com/
CLEAR/STOP
C /
INTERRUPT
<P006>
3
2
5
6
8
9
<P007>
CLEAR/STOP
C /
<P036>
3
2
5
6
8 9
CLEAR/STOP
C /
ERA
START
CHAN
I I

Registering the Key Operator Code Number

Press the CLEAR/STOP key, the INTERRUPT key, and
1
the CLEAR/STOP key again.
The following message will appear.
ENTER KEY OPERATOR CODE.
Enter 0 five times using the 10-key pad.
2
As each 0 is entered, the dashes on the message will change
to asterisks.
When the entry is complete, a "P" will appear on the COPIES
SELECTED display and the following message will appear.
INPUT A PROGRAM NUMBER, AND PRESS
START.
Enter the number 19 using the 10-key pad and press
3
the START key.
The following message will appear.
P19: KEY OPERATOR CODE NUMBER CHANGE.
FROM 00000 TO –––––, AND PRESS START.
Choose a new 5-digit code number and enter it using
4
the 10-key pad.
Press the START key.
5
The code number will change from the factory setting to the
new setting.
"P" will appear on the COPIES SELECTED display.
To continue with other key operator programs, enter
6
the appropriate program code number.
To exit the key operator program mode, press the
CLEAR ALL key.
–––––