Finisher Functions - Sharp AR-3551 Operation Manual

FINISHER

Finisher functions

■ ■ ■ ■ ■ Sort mode
Sorted sets will be delivered.
Original
■ ■ ■ ■ ■ Offset mode
Offset mode
■ ■ ■ ■ ■ Staple sort mode
Collated sets will be stapled and delivered to the offset tray. The stapling positions, orientation, paper size for
stapling, and stapling capacity are shown below.
Stapling positions
Top left corner of
printouts
Center left two
positions of printouts
Lower left corner
of printouts
5-10
Printouts
Non-offset mode
Portrait orientation
Available paper sizes: 8-1/2"
x 11", A4 and B5
Stapling capacity: Up to 30
sheets for any available sizes
Same as above
Same as above
■ ■ ■ ■ ■ Group mode
Groups of prints or copies of the same page will be
delivered.
Original
Sets will move from side to side so that each set or
group will be offset from the previous set or group
for easy separation.
Offset will function for non-stapled printer or copier
output, Non-offset can only be selected for copier
output.
Stapled sets will not be offset.
Landscape orientation
Printouts
Stapling cannot be made.